MailBucket: cf-talk

Re: VMWare Open BlueDragon image made available

Mon, 12 May 2008 00:03:23 -0400

Adam, you guys rock. I am hoping to have some cycles to spare in the near
future.... Just saying "open source cfml" gives me the gibblies.

G

On Sun, May 11, 2008 at 9:05 PM, Adam Haskell  wrote:

> Also an FYI Peter from the Open BD steering committee has been hard at work
> getting AMI's set up as well:
>
> CentOS 5 Ready2Run AMI: ami-274faa4e
> Fedora Core 6 Ready2Run AMI: ami-014da868
>
>
> http://developer.amazonwebservices.com/connect/kbcategory.jspa?categoryID=101
>
> Enjoy! And don't forget to check out OpenBluDragon.org and the group if you
> have questions.
>
> Adam Haskell
>
>
> On Sun, May 11, 2008 at 4:36 PM, Gerald Guido 
> wrote:
>
> > Greg,
> > Good deal. Could you provide any more info on the centos distro? A gig
> > sounds like it is a Desktop install. Is it one of the existing VM's form
> > VMWares Virtual Appliances Center or a custom install? Any admin tools on
> > it
> > like webmin or is it a pure command line interface?
> >
> > Many TIA,
> > G
> >
> >
> >
> > On Sun, May 11, 2008 at 3:23 PM, greg h  wrote:
> >
> > > Good news!
> > >
> > > The following post went up about 1 hour ago:
> > >
> > > VMWare Open BlueDragon image made available
> > > http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-
> > > available/<
> >
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-available/
> > >
> > > <
> > >
> >
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-available/
> > > >
> > >
> > > See download link in page at the link above. Note that the download is
> > of a
> > > zip that is >1GB.
> > >
> > > Happy CF'ing! [image: :-)]
> > >
> > > g
> > >
> > >
> > >
> >
> >
>
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305076
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

RE: CF Report Builder Questions

Mon, 12 May 2008 11:10:08 +1000

This is ColdFusion remember

Change

calc.PAGE_NUMBER = 1

to

calc.PAGE_NUMBER eq 1

Regards
Dale Fraser
http://learncf.com
http://flexcf.com


-----Original Message-----
From: Loathe [mailto:timothy.heald@gmail.com] 
Sent: Monday, 12 May 2008 10:15 AM
To: CF-Talk
Subject: CF Report Builder Questions

So I'm new to report builder and full of question.

I guess I'll start out easy and work my way up.

In my header I need to have a letter head display only on the first 
page.  In the field

Print when condition

I added

calc.PAGE_NUMBER = 1

Now the template throws an error.  How do I only display content on 
certain pages?  I need to doe the same thing with page numbers in the 
footer when calc.PAGE_NUMBER > 1.

Additionally, I have a bunch of sub reports.  Sometimes the queries that 
drive these reports will not have any content, so I need for them to not 
display, I also need the paragraph number scheme not to get messed up. 
Each major section that is displayed needs to increment the number, but 
the number needs to not increment for those reports where recordCount eq 0.

Is this possible?

TIA



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305075
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: VMWare Open BlueDragon image made available

Sun, 11 May 2008 21:05:56 -0400

Also an FYI Peter from the Open BD steering committee has been hard at work
getting AMI's set up as well:

CentOS 5 Ready2Run AMI: ami-274faa4e
Fedora Core 6 Ready2Run AMI: ami-014da868

http://developer.amazonwebservices.com/connect/kbcategory.jspa?categoryID=101

Enjoy! And don't forget to check out OpenBluDragon.org and the group if you
have questions.

Adam Haskell


On Sun, May 11, 2008 at 4:36 PM, Gerald Guido 
wrote:

> Greg,
> Good deal. Could you provide any more info on the centos distro? A gig
> sounds like it is a Desktop install. Is it one of the existing VM's form
> VMWares Virtual Appliances Center or a custom install? Any admin tools on
> it
> like webmin or is it a pure command line interface?
>
> Many TIA,
> G
>
>
>
> On Sun, May 11, 2008 at 3:23 PM, greg h  wrote:
>
> > Good news!
> >
> > The following post went up about 1 hour ago:
> >
> > VMWare Open BlueDragon image made available
> > http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-
> > available/<
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-available/
> >
> > <
> >
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-available/
> > >
> >
> > See download link in page at the link above. Note that the download is
> of a
> > zip that is >1GB.
> >
> > Happy CF'ing! [image: :-)]
> >
> > g
> >
> >
> >
>
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305074
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

CF Report Builder Questions

Sun, 11 May 2008 20:15:00 -0400

So I'm new to report builder and full of question.

I guess I'll start out easy and work my way up.

In my header I need to have a letter head display only on the first 
page.  In the field

Print when condition

I added

calc.PAGE_NUMBER = 1

Now the template throws an error.  How do I only display content on 
certain pages?  I need to doe the same thing with page numbers in the 
footer when calc.PAGE_NUMBER > 1.

Additionally, I have a bunch of sub reports.  Sometimes the queries that 
drive these reports will not have any content, so I need for them to not 
display, I also need the paragraph number scheme not to get messed up. 
Each major section that is displayed needs to increment the number, but 
the number needs to not increment for those reports where recordCount eq 0.

Is this possible?

TIA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305073
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: VMWare Open BlueDragon image made available

Sun, 11 May 2008 16:36:55 -0400

Greg,
Good deal. Could you provide any more info on the centos distro? A gig
sounds like it is a Desktop install. Is it one of the existing VM's form
VMWares Virtual Appliances Center or a custom install? Any admin tools on it
like webmin or is it a pure command line interface?

Many TIA,
G



On Sun, May 11, 2008 at 3:23 PM, greg h  wrote:

> Good news!
>
> The following post went up about 1 hour ago:
>
> VMWare Open BlueDragon image made available
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-
> available/
> <
> http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-available/
> >
>
> See download link in page at the link above. Note that the download is of a
> zip that is >1GB.
>
> Happy CF'ing! [image: :-)]
>
> g
>
>
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305072
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: writing to ms excel with jexcel [heur SPAMTRAP]

Sun, 11 May 2008 15:43:39 -0400 (EDT)

excellent, thanks very much :) works fine!!!

>> therefore how would you translate this formatting stated above
>
>
>  outFile = createObject("java", "java.io.File").init( "e:\temp\excel\test.xls" ); 
>  workBook=createObject("java","jxl.Workbook").createWorkbook(outFile);
>  labelObj=createObject("java","jxl.write.Label");
>  numberObj=createObject("java","jxl.write.Number");
>  ////////////////////////////////////////////////
>  sheet = workBook.createSheet("First Sheet", 0);  
>  thisLabel=labelObj.init(0,0,"happy happy gizmo");
>  sheet.addCell(thisLabel); 
>  thisNumber=numberObj.init(0, 1, 3.1459);
>  sheet.addCell(thisNumber);
>
>  ////////////////////////////////////////////////
>  NumberFormats = createObject("java", "jxl.write.NumberFormats");
>  WritableCellFormat = createObject("java", "jxl.write.WritableCellFormat");
>  Number = createObject("java", "jxl.write.Number");
>  DateFormat = createObject("java", "jxl.write.DateFormat");
>  DateTime = createObject("java", "jxl.write.DateTime");
>  Calendar = createObject("java", "java.util.Calendar");
>  NumberFormat = createObject("java", "jxl.write.NumberFormat");
>  
>  integerFormat = WritableCellFormat.init( NumberFormats.INTEGER );
>  number2 = Number.init( 0, 4, 3.141519, integerFormat );
>  sheet.addCell( number2 );
>
>  floatFormat = WritableCellFormat.init( NumberFormats.FLOAT );
>  number3 = Number.init( 1, 4, 3.141519, floatFormat );
>  sheet.addCell( number3 );
>
>  // note, # signs are escaped/doubled for CF
>  fivedps = NumberFormat.init("##.##########");
>  fivedpsFormat = WritableCellFormat.init( fivedps );
>  number4 = Number.init( 2, 4, 3.141519, fivedpsFormat );
>  sheet.addCell( number4 );
>
>  // Get the current date and time from the Calendar object
>  now = Calendar.getInstance().getTime();
>  customDateFormat = DateFormat.init( "dd MMM yyyy hh:mm:ss" );
>  dateFormat = WritableCellFormat.init( customDateFormat );
>  dateCell =  DateTime.init( 0, 6, now, dateFormat );
>  sheet.addCell( dateCell ); 
>  
>  ////////////////////////////////////////////////
>  workbook.write();
>  workbook.close();
>  
>  WriteOutput("Done");
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305071
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

VMWare Open BlueDragon image made available

Sun, 11 May 2008 12:23:22 -0700

Good news!

The following post went up about 1 hour ago:

VMWare Open BlueDragon image made available
http://blog.sixsigns.com/2008/05/11/vmware-open-bluedragon-image-made-
available/

See download link in page at the link above. Note that the download is of a
zip that is >1GB.

Happy CF'ing! [image: :-)]

g


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305070
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: writing to ms excel with jexcel [heur SPAMTRAP]

Sun, 11 May 2008 15:09:17 -0400 (EDT)

> therefore how would you translate this formatting stated above


  outFile = createObject("java", "java.io.File").init( "e:\temp\excel\test.xls" ); 
  workBook=createObject("java","jxl.Workbook").createWorkbook(outFile);
  labelObj=createObject("java","jxl.write.Label");
  numberObj=createObject("java","jxl.write.Number");
  ////////////////////////////////////////////////
  sheet = workBook.createSheet("First Sheet", 0);  
  thisLabel=labelObj.init(0,0,"happy happy gizmo");
  sheet.addCell(thisLabel); 
  thisNumber=numberObj.init(0, 1, 3.1459);
  sheet.addCell(thisNumber);

  ////////////////////////////////////////////////
  NumberFormats = createObject("java", "jxl.write.NumberFormats");
  WritableCellFormat = createObject("java", "jxl.write.WritableCellFormat");
  Number = createObject("java", "jxl.write.Number");
  DateFormat = createObject("java", "jxl.write.DateFormat");
  DateTime = createObject("java", "jxl.write.DateTime");
  Calendar = createObject("java", "java.util.Calendar");
  NumberFormat = createObject("java", "jxl.write.NumberFormat");
  
  integerFormat = WritableCellFormat.init( NumberFormats.INTEGER );
  number2 = Number.init( 0, 4, 3.141519, integerFormat );
  sheet.addCell( number2 );

  floatFormat = WritableCellFormat.init( NumberFormats.FLOAT );
  number3 = Number.init( 1, 4, 3.141519, floatFormat );
  sheet.addCell( number3 );

  // note, # signs are escaped/doubled for CF
  fivedps = NumberFormat.init("##.##########");
  fivedpsFormat = WritableCellFormat.init( fivedps );
  number4 = Number.init( 2, 4, 3.141519, fivedpsFormat );
  sheet.addCell( number4 );

  // Get the current date and time from the Calendar object
  now = Calendar.getInstance().getTime();
  customDateFormat = DateFormat.init( "dd MMM yyyy hh:mm:ss" );
  dateFormat = WritableCellFormat.init( customDateFormat );
  dateCell =  DateTime.init( 0, 6, now, dateFormat );
  sheet.addCell( dateCell ); 
  
  ////////////////////////////////////////////////
  workbook.write();
  workbook.close();
  
  WriteOutput("Done");



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305069
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: Avoid multiple form submits.

Sun, 11 May 2008 13:50:58 -0400

There is a workaround for this on my blog

www.revolutionwebdesign .com/blog

Search around you should find it in there
Tw



On 5/9/08, Robert Rawlins  wrote:
> Hello Guys,
>
> I've got an issue with a form which is sometimes a little slow to process.
> Seems that some of the users are clicking the submit button a whole bunch of
> times and we're getting a few problems arise as a result of it.
>
> How are you tackling this problem? presumably something with jQuery would be
> nice but I wanted to get your thoughts.
>
> Any ideas and code examples welcome :-D
>
> Robert
>
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305068
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: writing to ms excel with jexcel [heur SPAMTRAP]

Sun, 11 May 2008 10:58:53 -0400 (EDT)

hi paul, thanks again for this

just one more thing then i have everything i need :)

there are sections in the documentation that allows for number formatting and date formatting such as:

 WritableCellFormat integerFormat = new WritableCellFormat (NumberFormats.INTEGER);
Number number2 = new Number(0, 4, 3.141519, integerFormat);
sheet.addCell(number2);

WritableCellFormat floatFormat = new WritableCellFormat (NumberFormats.FLOAT);
Number number3 = new Number(1, 4, 3.141519, floatFormat);
sheet.addCell(number3);

 NumberFormat fivedps = new NumberFormat("#.#####");
WritableCellFormat fivedpsFormat = new WritableCellFormat(fivedps);
Number number4 = new Number(2, 4, 3.141519, fivedpsFormat);
sheet.addCell(number4);

 // Get the current date and time from the Calendar object
Date now = Calendar.getInstance().getTime();
DateFormat customDateFormat = new DateFormat ("dd MMM yyyy hh:mm:ss");
WritableCellFormat dateFormat = new WritableCellFormat (customDateFormat);
DateTime dateCell = new DateTime(0, 6, now, dateFormat);
sheet.addCell(dateCell); 

and i have noticed that you translated it to:

labelObj=createObject("java","jxl.write.Label");   
  numberObj=createObject("java","jxl.write.Number"); 
thisLabel=labelObj.init(0,0,"happy happy gizmo");   
  sheet.addCell(thisLabel);   
  thisNumber=numberObj.init(0, 1, 3.1459);   
  sheet.addCell(thisNumber); 

therefore how would you translate this formatting stated above

thanks very much

richard



>> kind enough to  provide me with a translation of the java instructions
>> into coldfusion please :)
>
>
>
>	outFile = createObject("java", "java.io.File").init("e:\temp\excel\test.xls"); 
>	workBook=createObject("java","jxl.Workbook").createWorkbook(outFile);
>	labelObj=createObject("java","jxl.write.Label");
>	numberObj=createObject("java","jxl.write.Number");
>	////////////////////////////////////////////////
>	sheet = workBook.createSheet("First Sheet", 0);	
>	thisLabel=labelObj.init(0,0,"happy happy gizmo");
>	sheet.addCell(thisLabel); 
>	thisNumber=numberObj.init(0, 1, 3.1459);
>	sheet.addCell(thisNumber);
>	workbook.write();
>	workbook.close();
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305067
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: writing to ms excel with jexcel [heur SPAMTRAP]

Sun, 11 May 2008 10:53:42 -0400 (EDT)

thanks very much paul, it works perfectly :)

thanks again

richard

>> kind enough to  provide me with a translation of the java instructions
>> into coldfusion please :)
>
>
>
>	outFile = createObject("java", "java.io.File").init("e:\temp\excel\test.xls"); 
>	workBook=createObject("java","jxl.Workbook").createWorkbook(outFile);
>	labelObj=createObject("java","jxl.write.Label");
>	numberObj=createObject("java","jxl.write.Number");
>	////////////////////////////////////////////////
>	sheet = workBook.createSheet("First Sheet", 0);	
>	thisLabel=labelObj.init(0,0,"happy happy gizmo");
>	sheet.addCell(thisLabel); 
>	thisNumber=numberObj.init(0, 1, 3.1459);
>	sheet.addCell(thisNumber);
>	workbook.write();
>	workbook.close();
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305066
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: writing to ms excel with jexcel [heur SPAMTRAP]

Sun, 11 May 2008 9:31:58 -0500

On Sun, 11 May 2008 10:13:09 -0400 (EDT), Richard White  wrote:
> kind enough to  provide me with a translation of the java instructions
> into coldfusion please :)



	outFile = createObject("java", "java.io.File").init("e:\temp\excel\test.xls"); 
	workBook=createObject("java","jxl.Workbook").createWorkbook(outFile);
	labelObj=createObject("java","jxl.write.Label");
	numberObj=createObject("java","jxl.write.Number");
	////////////////////////////////////////////////
	sheet = workBook.createSheet("First Sheet", 0);	
	thisLabel=labelObj.init(0,0,"happy happy gizmo");
	sheet.addCell(thisLabel); 
	thisNumber=numberObj.init(0, 1, 3.1459);
	sheet.addCell(thisNumber);
	workbook.write();
	workbook.close();






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305065
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: CFDocument Header Not Responding to Font-Size

Sun, 11 May 2008 10:26:48 -0400

Stephen,

I've run into something similar before and solved the problem by  
putting the CSS in the body.   Example:


I am in the header

div#header h1{font-size:36px; font-family: Arial,Helvetica,sans-serif;}


I am in the Body



HTH,

Jon

On May 11, 2008, at 3:52 AM, Stephen Cassady wrote:

> Hey Everyone -
> Just wondering if other people can duplicate this:
>
> If I put this in my CFDocument:
>  36px;">I
> am in the Body
>
> The text fonts, weights, and sizes correctly.
>
> If I put this in my CFDocumentitem type="header" (inside my  
> CFDocument):
>  36px;">I
> am in the Header
>
> The text fonts and weights, but does not size (size is default size).
>
> If this can be duplicated, is this a bug, is this something I can work
> around (and if yes, what would be the process to work around this  
> problem?).
>
> Thanks -
> Stephen
>


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305064
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

writing to ms excel with jexcel

Sun, 11 May 2008 10:13:09 -0400 (EDT)

Hi

i have been using jexcel to read documents and it is working great. i got my first initial example from someone on this forum

however, i now need to create a new ms excel file and write data to it all with jexcel.

i know its possible as the jexcel provides the instructions (http://www.andykhan.com/jexcelapi/tutorial.html#writing) but they are all in java and not in coldfusion, and i am not that good yet to know how to translate the java instructions to coldfusion instructions

i have found many tutorials on how to read data from excel using jexcel but not 'writing data' specifically using coldfusion

does anyone know of any tutorials i can go through, or would anyone be kind enough to  provide me with a translation of the java instructions into coldfusion please :)

i know its just a few lines of code, basically creating a new excel document, writing cells, and writing and closing the document

thanks very much for any help you can give me

richard 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305063
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Refreshing CFPod Contents

Sun, 11 May 2008 09:48:17 -0400 (EDT)

Is there a way to programmatically refresh the contents of a CFPod similar to the way you can call the GridRefresh method to refresh the grid.  

OR

Is there a way to set a refresh time for a pod?  

Thanks,

Michael 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305062
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

chroot and ColdFusion multiserver

Sun, 11 May 2008 06:36:11 -0400

Has anyone implemented chroot in their multiserver installation? I am
wondering how sandbox security is affected.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305061
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

CFDocument Header Not Responding to Font-Size

Sun, 11 May 2008 01:52:03 -0600

Hey Everyone - 
Just wondering if other people can duplicate this:

If I put this in my CFDocument:
I
am in the Body

The text fonts, weights, and sizes correctly.

If I put this in my CFDocumentitem type="header" (inside my CFDocument):
I
am in the Header

The text fonts and weights, but does not size (size is default size).

If this can be duplicated, is this a bug, is this something I can work
around (and if yes, what would be the process to work around this problem?).

Thanks -
Stephen




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305060
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

RE: Multiple recipients in BCC via Exchange

Sat, 10 May 2008 11:05:29 -0500

According to CF LiveDocs, CFMAIL needs a comma-separated list of email addresses for TO, CC and BCC attributes.
 
I have always used commas to separate multiple email addresses in a CFMAIL tag.
 
m!ke
 

  _____  

From: Jason Durham [mailto:jdurham@cti-stl.com]
Sent: Fri 5/9/2008 4:39 PM
To: CF-Talk
Subject: RE: Multiple recipients in BCC via Exchange



I'm fairly certain MS Exchange will not allow comma delimited emails.  I
also manage our Exchange Server.





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305059
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

RE: CF8: Reading a file from the end instead of the beginning?

Sat, 10 May 2008 11:05:01 -0500

Great!  I'm glad it's working. I may need to use this in the future.  ;^)

  _____  

From: C S [mailto:cfSearching@yahoo.com]
Sent: Fri 5/9/2008 8:48 PM
To: CF-Talk
Subject: Re: CF8: Reading a file from the end instead of the beginning?

>You could shell out (CFEXECUTE) the tail command to get those lines.

Michael,

Good suggestion. Tail works very well.  Cheers.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305058
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4

Re: Spry Eclipse Plugin?

Sat, 10 May 2008 03:54:41 -0600

3.4 hasn't been released yet, but it's getting close.

I've been using 3.4M6 ( http://phoenix.eclipse.org/packages/ ), the EE
package, and it's wonderful.

Some great improvements have been made in many places.

I think cfeclipse needs to be installed as a "drop in", which is the
new way of installing plugins the old way (much cleaner).

Holler if you've got any questions.  There's a link for equinox
somewhere around here (the new plugin update manager).

denstar

On Fri, May 9, 2008 at 9:01 PM, Gerald Guido  wrote:
>>> And Eclipse 3.4 has a WYSIWYG HTML editor, for those pesky table-based
> layouts.
>
> @denstar
>
> Could you point me to that wonderful nugget of joy? With that, CF studio
> will become just another text editor (though awesome). I think the only
> other thing I use it for is the change tag case feature...
>
> G
>
> On Fri, May 9, 2008 at 8:18 PM, denstar  wrote:
>
>> On Fri, Apr 27, 2007 at 8:30 PM, Aaron Roberson 
>> wrote:
>> ....
>> > Really, are we throwing the baby (DW) out with the bathwater
>> > (commercial license)?
>>
>> Nope.
>>
>> Eclipse just plain destroys dreamweaver, from a coder's perspective.
>>
>> I'm liking JSDT for Eclipse javascript development.  W00t3rZ!
>>
>> And Eclipse 3.4 has a WYSIWYG HTML editor, for those pesky table-based
>> layouts.
>>
>> But, no, there is no question in my mind, Eclipse is where it's at.
>>
>> Even if both were free (as in beer) and open, I'd be using Eclipse.
>>
>> Denny
>>
>>
>
> 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date
Get the Free Trial
http://ad.doubleclick.net/clk;192386516;25150098;k

Archive: http://www.houseoffusion.com/groups/CF-Talk/message.cfm/messageid:305057
Subscription: http://www.houseoffusion.com/groups/CF-Talk/subscribe.cfm
Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=9388.8541.4